Intro to surfaces | Day 11 of Learn Autodesk Fusion 360 in 30 Days (2026 EDITION)
45K views · 2026-05-06
Industrial Design
Get the instructional guide bundle (PDF): https://bit.ly/guideBundle
Official playlist updated as lessons drop: https://bit.ly/30daysUpdated
Welcome to Day 11 of the official "Learn Autodesk Fusion in 30 Days" series (2026 version)! Today, we are modeling a dog bowl using Surface modeling tools. The focus of this lesson is to show you how easy it is to create simple surface models with Offset and Thicken commands. You will also use the Hybrid design intent and learn about the use of Components.
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Patreon: https://patreon.com/productdesignonline
Buy Kevin a Coffee: https://www.buymeacoffee.com/pdo
OFFICIAL 30 DAYS PLAYLIST (2026 EDITION)
https://bit.ly/30daysUpdated
SUBSCRIBE (& hit the Bell to get alerted for the new lessons!)
http://bit.ly/sub-right-now
Key Takeaways / Chapters:
00:00 - Introduction to Day 11 of Learn Autodesk Fusion in 30 Days 2026
00:14 - Setting up Hybrid Design & Saving
00:33 - Creating & Naming Components (Metal Bowl)
01:28 - Creating the Rubber Grip Component
01:59 - The Importance of the 'Active' Component
02:25 - Sketching the Bowl Profile
03:08 - Using Tab for Dimensions & Angles
04:16 - Using the Trim Tool (and its risks)
05:23 - Fully Defining the Sketch with Constraints
06:24 - Surface vs. Solid: The Open Profile Concept
07:00 - The Surface Revolve Tool
08:15 - Adding Fillets to Surface Edges
08:44 - Understanding the 'Yellow' Surface Face
09:15 - Using Thicken to create a Solid Body
10:58 - Activating the Rubber Grip Component
11:47 - Pro Tip: Active Component Visibility Settings
12:08 - Creating the Grip with the Surface Offset Tool
12:48 - Applying Thickness to the Rubber Grip
13:15 - Adding Appearances (Stainless Steel & Rubber)
13:41 - Inspecting the fit with Section Analysis
KEY TOPICS COVERED
-Hybrid Design Intent: How to manage multiple parts (Metal & Rubber) in one file.
-Internal Components: Setting up a clean Browser hierarchy for manufacturing.
-Surface vs. Solid: Understanding why surface profiles don't need to be "closed" loops.
-The Thicken Tool: How to turn an infinitely thin surface into a manufacturable 3D object.
-Clearance & Offsets: Creating perfectly fitting parts with the Offset tool.
If you enjoy this series, please Subscribe and hit the bell icon 🔔 to be notified when new lessons drop!
—
#Fusion360 #fusion #ProductDesignOnline #autodeskfusion #autodeskfusion360
Official playlist updated as lessons drop: https://bit.ly/30daysUpdated
Welcome to Day 11 of the official "Learn Autodesk Fusion in 30 Days" series (2026 version)! Today, we are modeling a dog bowl using Surface modeling tools. The focus of this lesson is to show you how easy it is to create simple surface models with Offset and Thicken commands. You will also use the Hybrid design intent and learn about the use of Components.
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Patreon: https://patreon.com/productdesignonline
Buy Kevin a Coffee: https://www.buymeacoffee.com/pdo
OFFICIAL 30 DAYS PLAYLIST (2026 EDITION)
https://bit.ly/30daysUpdated
SUBSCRIBE (& hit the Bell to get alerted for the new lessons!)
http://bit.ly/sub-right-now
Key Takeaways / Chapters:
00:00 - Introduction to Day 11 of Learn Autodesk Fusion in 30 Days 2026
00:14 - Setting up Hybrid Design & Saving
00:33 - Creating & Naming Components (Metal Bowl)
01:28 - Creating the Rubber Grip Component
01:59 - The Importance of the 'Active' Component
02:25 - Sketching the Bowl Profile
03:08 - Using Tab for Dimensions & Angles
04:16 - Using the Trim Tool (and its risks)
05:23 - Fully Defining the Sketch with Constraints
06:24 - Surface vs. Solid: The Open Profile Concept
07:00 - The Surface Revolve Tool
08:15 - Adding Fillets to Surface Edges
08:44 - Understanding the 'Yellow' Surface Face
09:15 - Using Thicken to create a Solid Body
10:58 - Activating the Rubber Grip Component
11:47 - Pro Tip: Active Component Visibility Settings
12:08 - Creating the Grip with the Surface Offset Tool
12:48 - Applying Thickness to the Rubber Grip
13:15 - Adding Appearances (Stainless Steel & Rubber)
13:41 - Inspecting the fit with Section Analysis
KEY TOPICS COVERED
-Hybrid Design Intent: How to manage multiple parts (Metal & Rubber) in one file.
-Internal Components: Setting up a clean Browser hierarchy for manufacturing.
-Surface vs. Solid: Understanding why surface profiles don't need to be "closed" loops.
-The Thicken Tool: How to turn an infinitely thin surface into a manufacturable 3D object.
-Clearance & Offsets: Creating perfectly fitting parts with the Offset tool.
If you enjoy this series, please Subscribe and hit the bell icon 🔔 to be notified when new lessons drop!
—
#Fusion360 #fusion #ProductDesignOnline #autodeskfusion #autodeskfusion360